SmartR230 DC2DC Simulator

A non-factory setup: the N82/1 is replaced by a DC2DC charger, with the SmartR230 on CAN-B

CAR ASLEEP DC2DC WAITING LED STEADY SIM TIME 0d 00:00:00

SmartR230 emulator listening

LED
Emulator
Sleep in5:00
Wi-Fi off in4:40
Set the dash clock IDLE
Last result—

Instrument cluster (A1) display off

 
 
CLOCK03:17day 1

Power supply schematic click a fuse, the switch or the LINK

G2 ALTERNATOR 14.1 V LOADS 0.0 A DC2DC 12/12-50A non-isolated DC2DC WAITING   LINK jumper fitted 12.6 V 80% G1 SYSTEMS AGM 70 Ah M1 12.6 V 70% G1/4 STARTER lead-acid 35 Ah ISOLATOR F52f2 200 A intact IN 60 A intact OUT 60 A intact LINK 20 A intact N82/1 REMOVED K57 open, unwired K75 closed, unwired SMARTR230 emulates N82/1 LED CAN-B to the car
current drawn from a battery charging or supply current no current

CAN-B bus asleep

CAN-B
awake asleep suspect module

Modules wake together when the key goes in and sleep together after the bus has been quiet. Names only: this is a teaching view, not a module map.

DC2DC charger app style

StatusWAITING
Charge stage–
Input voltage0.0 V
Output voltage0.0 V
Input current0.0 A
Output current0.0 A
Timer–
SPEC default 14.0 V. The DC2DC charger decides the engine is running when the input stays above this.
USER set to 10 s: the engine counts as running once the bus holds Vstart for this long
SPEC default 13.1 V. The DC2DC charger stops charging after about 10 seconds below it.
SPEC 1 to 50 A. The 40 A lead-acid preset is rarely reached: a 35 Ah battery accepts far less.
MODEL bad cabling lowers the voltage the DC2DC charger sees, which can hide the engine.

Settings

USER below this the EIS and the other modules have no power, so nothing wakes
USER the car on its own, bus asleep. About 40 mA with the SmartR230 listening, about 20 mA once it is in deep sleep
USER measured on the device: 68 mA awake
USER between the car sleeping and the five-minute timer ending
USER measured on the device: 14 mA in deep sleep
rest voltage 12.6 V
rest voltage 12.4 V
Same batteries as the factory simulator: 70 Ah AGM and 35 Ah lead-acid. Alternator output is fixed at 14.1 V USER

Guided demos about 30 seconds each