Mercedes SL R230: "Battery Fault, Visit Workshop"

Why the warning stays on after the battery control module is replaced, and how to clear it
← Back to home

The warning

On the instrument cluster of a Mercedes-Benz SL R230, a battery symbol appears in the speedometer, and "Visit workshop" appears in the rev counter. Together they mean the car has logged a battery fault.

Mercedes SL R230 instrument cluster showing a battery symbol in the speedometer and the words Visit workshop in the rev counter

This warning can have more than one cause, so if you see it, have the car's battery and charging system checked properly. This page covers one specific cause: the warning that stays on after the factory battery control module (BCM) has been replaced.

The Problem

After replacing the BCM

There are several modern dual battery charging solutions that can replace the factory battery control module in the Mercedes SL R230. However, the car no longer hears from the module it expects, so it reports the module as missing. The dashboard flashes fault codes, and the "battery fault, visit workshop" warning stays on, no matter how well the new charging solution performs.

SmartR230 in a Nutshell

SmartR230 is a standalone CAN-bus emulator designed specifically for the Mercedes-Benz SL R230, and the companion to your new dual battery charging solution. SmartR230 sends the signals the car expects to hear, so the fault codes and the "battery fault, visit workshop" warning are suppressed. Your charging solution looks after the batteries, and SmartR230 keeps the dash clean.

Compatibility
Mercedes-Benz SL R230 (2001–2012)
Installation
Simple installation, we will support you - see our step-by-step install guide
Also included
Set your dashboard clock from your phone, and a built-in Wi-Fi page that shows your car's VIN and sleep state, useful when diagnosing battery drain

Common questions

Which cars does SmartR230 fit?

It is designed specifically for the Mercedes-Benz SL R230, 2001 to 2012.

How do I fit it?

It goes beside the rear SAM behind the seats and uses a fuse tap for power, so no original wiring is cut. Our install guide has a video and step-by-step instructions.

How much is it?

£88.50 in the UK with delivery included, or $148 in the USA with delivery, customs and import fees all included. Elsewhere, email payments@smartr230.co.uk for a quote.

Ready to clear the warning?

Order the SmartR230 BCM Emulator →